Kasco-marine Horizontal Float Manuel d'utilisateur télécharger pdf (Page 2)

STEP FIVE

With a felt-tip marker, draw three to four marks

around the circumference of the motor housing at the

appropriate measurement from the back (or bottom)

of the motor housing

given below:

Model F2400: 3/4”

Model F3400: 3-3/8”

Model 4400: 3-3/8”

Model 8400: 3-1/4”

STEP SIX

Place the two U-Brackets directly across from each

other (180

) over the top ring of the motor cage. The

cord clamp on the cage should be 90

from each of

the U-Brackets. (See pictures on next page)

Models F2400, F3400

and 4400 - Angle

posterior

to bolts.

Model 8400 - Angle

anterior to bolts.

STEP SEVEN

Insert the Spacer Bracket under the U-Bracket and

inside the cage. Secure this assembly using one 1/4”

x 1” Bolt and a 1/4” Lock Nut, and one 1/4” x 1-1/4”

Bolt and a 1/4” Hex Nut. The longer bolt should be

on the side of the U-Bracket that is closer to the cord

clamp. Tighten the hardware using the 7/16” wrench

and socket & wrench until the U-Bracket clamps

firmly around the cage (U-Bracket should pull to-

gether slightly). Repeat with the second U-Bracket.

STEP EIGHT

Attach an Angle Bracket to each of the longer (1-

1/4”) bolts on the U-Brackets (See photo for orienta-

tion) with a 1/4” Lock Nut.

STEP NINE

Wrap the Draw Band around the motor housing and

position so that the back of the Draw Band touches

the marks drawn in Step Five. There is no front or

back to the Draw Band itself - it is reversible. Orient

the arm of the Draw Band so it aligns with the cord

clamp on the cage of the motor housing and is paral-

lel to the Angle Brackets attached in Step Eight. Se-

cure using a 1/4” x 1” Stainless Steel Bolt and a 1/4”

Lock Nut. (See photo on next page.)

Models F2400, F3400

and 4400

Model 8400

1 2 3 4

Commentaires sur ces manuels

Pas de commentaire

Kasco-marine Horizontal Float Manuel d'utilisateur Page 2

Commentaires sur ces manuels

Produits connexes et manuels pour Équipement pour l'eau Kasco-marine Horizontal Float